MY-3 outlet box owns many new features, which makes the installation and operation convenient and safe.Usually, the outlet box is set under the floor surface,and in any position of access floor. Inside of outlet box, every single panel with sockets can be interchanged, and any combination is allowed, and the panel without sockets can be used when there's no precise requirements or the solution is still up in the air. The flexibility of sockets combination makes all the cable system in the room integrated. Outlet box’s frame part is texture finish which helps dirt-resistant, and there are two color choices for the covering---- light gray and charcoal.

There is a reinforced steel board embedded in the covering frame, which you can reverse and remove from the frame. And the steel board is fixed lower than the frame, which makes space for 7mm thick carpet or other covering materials on bare finish access floor. Under the access floor, there are holes for the cable at the same height. The cables packed by jacket can get through the hole from one side of outlet box, and reach out of the covering safely. Frame can be reverse too, and there’s a unique screw system that can adjust the steel board’s position offering flexible space for different thick of carpets. The operating screws makes installation and removal quick and effective. When you want to remove the sockets panel inside, you just loose two screws and take off the socket panel,and you don’t need to remove the whole frame of outlet box, so the other power,communication and data system are still working while you are removing sockets in one outlet box.

技术参数与安装

材料：阻燃ABS原料、喷塑钢板。

强度：只有当覆盖框架的外边缘有紧固支撑时，出线盒才能够抵抗较小的意外载重，它们跟高架地板载荷不可同日而语，如有需要，可提供特殊详情。

耐火：出线盒的外包装采用金属制造，是非燃性的。

耐化学性能：不腐蚀

吸水性：出线盒可使用于以下情况：所使用的清洁措施在液体池中无效，或地板表面湿透。

保护程度：当按照安装指南的陈述安装时，围绕分类IP20。

出线盒在高架地板的深度以内放置，同时出线盒的数目和位置依使用者的要求决定。推荐分布为：下限为每10平方米地板一个出线盒，上限为每4平方米一个，这个数字大约等同于出线盒分别位于3000mm和2000mm的空格内。一般来说，超过1600mm没有一个出口是可取的。然而，当出线盒用来向桌面或屏幕传输已安装好的完整的出口角供给的电力时，这种情况可以延伸。在使用前，所有地板出线盒必须用制成的模块完全安装好，使用者的要求明确的话，也不会造成什么问题，不管怎样，出线盒是可互换的，可按设备的特殊点方便的、迅速的重安装。先拔去出线盒，再重新安装出线盒和整个地板面板。