0
In today's scientific and technological environment, static electricity is no longer just a simple shock wave that is annoying. Static electricity radiation can damage or degrade the sensitivity of electronic components, ignite flammable gases, and cause components and equipment to malfunction. HUATONG static electricity control floor tiles are the ultimate solution to the above static electricity problems.
Maintenance
Because of its surface impermeability, dirt and grime can be completely removed from the surface of HUATONG static conductive and static dissipative floor tiles. Like other floor materials, light colors are more easily dirty than dark colors, and therefore require more frequent and thorough cleaning.
Use a machine mop and a good neutral detergent to clean the floor, followed by a rinse with clean water. Slightly dirty floors can be mopped with a wet mop, but they should also be mopped regularly with a machine. Severe stains or marks with black spots can be removed with a floor cleaning machine, a synthetic cleaning pad, or other commercial removal methods. After any mopping or stain removal operation, rinse with clean water to remove all residual detergent.
Floors should be maintained periodically with a spray polish. This process produces a medium to high gloss finish and provides additional protection against nicks or scratches.
Except for the blasting process, wax or ground coating should not be used directly on HUATONG conductive tiles or anti-static tiles. Regular use of wax or ground coating will cause an insulating film on the ground. If you want a better anti-static effect, it is recommended to use a high-speed polishing machine (750Rpm or greater).
